Mertex-LogoWe also deal in Steel Billets, Hot Rolled Coils, Cold Rolled Coils, Deformed Bars, Wire Rods to name but a few of our wide range of products.Mertex deals in Steel Billets, Hot Rolled Coils, Cold Rolled Coils, Deformed Bars, Wire Rods to name but a few of our wide range of products.
  Search Our Site
  
Tubing & Casing with API and Premium Connections

We can supply tubing & casing manufactured according to API Specification 5CT from mills authorised to use the API Monogram on API Specification 5CT Products with the following connections:

Short round thread casing (STC)

Long round thread casing (LC)

Buttress thread casing (BC)

Extreme-line casing (XC)

Non-upset tubing (NU)

External upset tubing (EU)

Integral joint tubing (IJ)

We can also supply tubing and casing with premium connection (metal to metal seal). All premium connections supplied are tested to ISO 13679:2002 / ANSI/API recommended practise 5C5. For details please contact us.

We are authorsied to supply from mills worldwide, but we have a long-term marketing arrangement with mills in Russia, Ukraine, Czech Republic, China, Germany, Spain, France, Poland and USA under which we market their range of tubulars to many international markets.

Grades: H40, J55, K55, N80, M65, L80, L8013CR, C90, C95, T95, P110, Q125, V150


Sizes:
4 ½ Inches Upward for Casing
2 3/8 Inches Upward for Tubing

tubing_casing_1271140109.jpg
Line Pipe ( Welded and Seamless )

We can supply line pipes manufactured according to API Specification 5L from mills authorised to use the API Monogram on API Specification 5L Products.
We supply from mills worldwide, but we have a long-term marketing arrangement with mills in United Kingdom, Germany, France, Russia, Czech Republic, China, Spain and USA under which we market their range of line pipes to many international markets.
Grades: X42, X46, X52, X60, X65, X70, X80
Sizes:
1/8 Inches to 120 Inches

line_pipe_1271142303.jpg
Drill Pipe

We can offer Drill Pipe according to API Specification 5D & 7 from mills authorised to use the API Monogram on API Specification 5D & 7 Products.
We supply from mills worldwide, but we have a long-term marketing arrangement with mills in Russia, Germany, The Netherlands, Czech Republic, China, under which we market their range of drill pipes to many international markets.
Grades: E-75, X-95, G-105 and S-135
Size:2-3/8" Upwards.

drill_pipe_1271142586.jpg
Track Products for Railways

British Standard ’A’ Design Rails, Rail Sections 60A, 70A, 75A, 80A, 90A, 95A, 100A, 110A, 113A.                                                                                      
U.I.C. Design Rail Sections 50, 54, 60
A.S.C.E. Design Rail Sections 40, 60, 75, 80.
A.R.E.A Rail Sections.
Various Rail Sections (Tapered Head)
Various Rail Sections (Parallel Head)
Light Section Rails.
Mine Rails.
Crane Rails

track_product_1271142622.jpg
Duplex stainless steel Pipes

We can supply Duplex Stainless Steel Pipes according to API5LC specifications. For more details please contact us.

6774DUPLEX-PIPE_1278772819.JPG
Conductor Pipes / Casings

We can supply conductor pipes/casings plain end or with weld on connectors.
We supply from mills worldwide, but we have a long-term marketing arrangement with mills in United Kingdom, Germany, Spain, Russia, China, Japan and USA under which we market their range of line pipes to many international markets.
Grades: B, X42, X46, X52, X56, X60, X65, X70, X80
Sizes:
20 inches to 42 Inches

Weld on Connector

It features a Primary Thread Seal and a Metal-to-Metal Seal. O-rings seals are an optional feature. This connector is available in either a two start or a four start configuration, with 2 threads per inch. Four start threads make-up in approximately one-half turn and two start threads make up in approximately one turn. Crests and roots run parallel to the axis. The connector pin is designed to stab deeply into the box and the connection’s design facilitates self-alignment without the need for stab guides. Spin-up torque is very low and power torque loading occurs between 10 – 20% of a turn. All are only 1” over Pipe OD and the ID is 99% of Pipe ID. A ½” elevator shoulder on both pin and box allow it to be run pin up or box up.